Latest News
Add a short description for your blog.
CO2 vs Diode vs Galvo Laser Material Settings
A material settings table is only useful when the laser type is correct. CO2, diode, blue-laser galvo, and 1064 nm...
X1S 10W, 20W, and 60W Wood Cutting Settings
X1S is the large-format diode path, so the core buying decision is usually work area plus power. Use these starter...
P2 Ultra 20W Metal Marking Settings for Stainless Steel and Anodized Aluminum
P2 Ultra 20W is a compact 1064 nm metal-marking path. It should not be tuned like a standard blue diode...
TYVOK P2 2W and 10W Speed and Power Settings Guide
TYVOK P2 is a compact blue-laser galvo workflow, so the best starting point is not the fastest number on paper....
Laser Engraving Settings for Wood, Leather, Acrylic, and Metal
Most engraving problems start before the first file runs: the machine, material surface, speed unit, and test method are not...
TYVOK X1S 10W vs 20W vs 60W Laser Engraver Buying Guide
X1S power guide TYVOK X1S 10W vs 20W vs 60W Laser Engraver Compare TYVOK X1S laser power options for large-format...
TYVOK P2 2W vs 10W vs P2 Ultra 20W Buying Guide
P2 buying guide TYVOK P2 2W vs 10W vs P2 Ultra 20W Compare TYVOK P2 laser power options for compact...
Tyvok P2 vs Every Galvo Laser: The Complete 2026 Comparison
Last updated: May 1, 2026 | Side-by-side tested and verifiedWe Tested Every Galvo Laser Under $2,000When we launched the P2...
