Latest News
Add a short description for your blog.
Topographic Map SVG: Choose Flat Engraving or Stacked Layers
Choose between a flat contour engraving and stacked cut layers before exporting terrain artwork to a large wood sheet.
Butterfly Book Holder: Rework Spacers for 3 mm Stock
A 3 mm book-holder kit needs its spacer and slot relationship tested when the source design assumed a thicker assembly.
Layered Shadow Box: Check Alignment Holes Before Cutting Every Layer
Proof two wood layers on the same registration points before cutting a complete shadow box stack. Inspect the actual fit.
Print and Cut Offset? Repeat a Marker Before Moving the Sheet
A persistent offset may be a motion or homing issue. Compare repeated marks with the sheet still before changing artwork...
Print and Cut Targets: Put the Second Mark on the Opposite Corner
Place reference targets across both sheet axes before a flipped-panel job. Check the actual frame and target order before output.
Center Line Trace Adds Spurs? Check the Source Pixels
Center Line Trace can turn rough bitmap edges into unwanted branches. Check resolution and compare each junction before engraving a...
Export Laser Cut Tabs: Preserve the Actual Cut Path
A plain SVG export may omit tabs defined in cut settings. Check the generated cut path and reopen the export...
LightBurn 3D Import: Save the Model Before Bitmap Conversion
LightBurn 2.2 Early Access can turn a 3D model into a depth-map image. Save an editable copy before conversion removes...