Short answer: Use this TYVOK P2 Ultra 20W page as a starter settings record. Run a material test grid on the exact blank, then save speed, power, passes, focus, cleanup, and supplier details before customer work.
TYVOK P2 Ultra 20W starter settings table
| Material | Starter speed | Power | Passes | Test note |
|---|---|---|---|---|
| Brass tag | 300-800 mm/s | Medium | 1-2 | Polished brass may need cleaning before marking. |
| Copper sample | 300-700 mm/s | Medium to high | 1-2 | Copper finish can change contrast heavily. |
| Small nameplate | 400-900 mm/s | Medium | 1 | Fixture the part before batch work. |
How to turn the setting into a repeatable product
Confirm the software unit first, then keep one saved record per material. A reliable TYVOK workflow should include the material source, machine power, test photo, cleanup step, and final customer-ready inspection.
When to compare another TYVOK machine
If the project changes material family, work area, or production volume, compare the TYVOK settings chart and buying guide instead of forcing one preset across P2, P2 Ultra, X1S, X1S Pro, and K1 Pro.
