Latest News
Add a short description for your blog.
P2 Ultra 20W Stainless Steel Metal Marking Settings
Short answer: Use this as a starter test path for TYVOK P2 Ultra 20W 1064 nm, not as a universal...
TYVOK P2 10W Wood Engraving Settings
Short answer: Use this as a starter test path for TYVOK P2 10W, not as a universal preset. Run a...
TYVOK P2 2W Leather Engraving Settings
Short answer: Use this as a starter test path for TYVOK P2 2W, not as a universal preset. Run a...
CO2 vs Diode vs Galvo Laser Material Settings
A material settings table is only useful when the laser type is correct. CO2, diode, blue-laser galvo, and 1064 nm...
X1S 10W, 20W, and 60W Wood Cutting Settings
X1S is the large-format diode path, so the core buying decision is usually work area plus power. Use these starter...
P2 Ultra 20W Metal Marking Settings for Stainless Steel and Anodized Aluminum
P2 Ultra 20W is a compact 1064 nm metal-marking path. It should not be tuned like a standard blue diode...
TYVOK P2 2W and 10W Speed and Power Settings Guide
TYVOK P2 is a compact blue-laser galvo workflow, so the best starting point is not the fastest number on paper....
Laser Engraving Settings for Wood, Leather, Acrylic, and Metal
Most engraving problems start before the first file runs: the machine, material surface, speed unit, and test method are not...