Short answer: Use this page as a starter test grid for TYVOK P2 Ultra 20W. Confirm software units, material supplier, focus, air assist, and cleanup before using any setting for customer work.
TYVOK P2 Ultra 20W starter settings table
| Material | Starter speed | Power | Passes | Test note |
|---|---|---|---|---|
| Black anodized card | 600-1200 mm/s | Low to medium | 1 | Start faster and lighter than raw stainless tests. |
| Anodized tag | 500-1000 mm/s | Medium | 1 | Clean and inspect contrast after marking. |
| Colored anodized part | 400-900 mm/s | Low to medium | 1 | Different dye colors can react differently. |
How to use this test grid
Start with scrap from the same supplier and thickness. Change only one variable at a time, then save the tested speed, power, passes, photo, material source, and cleanup note. Keep cutting and engraving settings separate.
When to choose a different TYVOK path
If the job changes from compact marking to large-format cutting, or from diode work to clear acrylic, move to the machine family that fits the material path instead of forcing one preset across different laser types.
Related TYVOK settings to compare next
These related TYVOK settings pages connect compact P2, P2 Ultra metal marking, X1S diode work, X1S Pro production planning, and K1 Pro CO2 acrylic workflows.
