Short answer: Use this as a starter test path for TYVOK X1S 60W, not as a universal preset. Run a small grid on the exact material before customer work.
TYVOK X1S 60W starter settings table
| Material | Operation | Starter speed | Power | Passes | Test note |
|---|---|---|---|---|---|
| 3 mm basswood plywood | Cut | Use mm/min test grid | High | 1-2 | Compare one strong pass with two cleaner passes. |
| 5 mm plywood | Cut | Use slower mm/min test grid | High | 2+ | Air assist and sheet flatness become more important. |
| Plywood sign engraving | Engrave | Use faster mm/min test grid | Medium | 1 | Separate engraving settings from cut settings. |
Confirm software units first
X1S diode jobs are commonly managed in mm/min. Do not mix P2 mm/s assumptions with X1S cutting workflows.
Why plywood varies
Glue layer, core voids, sheet flatness, moisture, and supplier changes can make one published preset fail on another sheet.
When X1S Pro fits better
If the workflow needs larger repeatable production, operator handoff, and more fixture control, compare X1S Pro 20W or 60W before scaling.
Settings depend on material supplier, coating, thickness, focus, air flow, and software units. Avoid PVC, vinyl, and unknown plastics. For paid work, save the final tested speed, power, passes, photo, and material source.
Related TYVOK settings to compare next
These related TYVOK settings pages connect compact P2, P2 Ultra metal marking, X1S diode work, X1S Pro production planning, and K1 Pro CO2 acrylic workflows.
